Which Is The Safest Car Wash For Your Vehicle

Like there’s multiple ways to prepare an egg, there are numerous kinds of automobile washes. They are available close to you by using itscarwash.com Don’t think that this will suggest that all washing methods are alike. Far from it. Each has their own set of advantages and drawbacks. The pros and cons, but they’re not always obvious. We’ve compiled a list of pros and cons to help you go over every wash technique in detail, separating the good and bad to help you understand the most important aspect of car maintenance.

Method #1: Handwash

If you ask any detailing expert, they’ll advise you on the most secure method of washing your car. is to hand-car wash . There are a variety of ways that handwashing can be accomplished that range from the classic two-bucket technique to the latest pressure-filled foam cannons but regardless of how you do it each one requires you (or your detailing professional) washing the water using soap and then washing the car with an easy-to-handle mitt. So , what exactly do you think of a handwash? In our detailing service, Simon’s Shine Shop, we begin with a pre-wash where we cover the car with snow foam and wash the vehicle off. It’s not absolutely necessary however, it can help us to get a thorough clean. After that, we paint the car with another layer of suds. This is then agitated using wash mitts that are soft. The foam breaks the dirt down, while the wash mitts assist in breaking them up. After that, we wash and dry. This kind of washing requires an extensive amount of time, along with a wide range of equipment, and , if you’re having it done by professionals, a small amount of cash. Between how soft it’s on the surface and how effective it is in removing dirt, it’s the most efficient type of car wash that you can perform.

PROS:

  • Reduces scratching
  • Can remove heavy contamination

CONS:

  • It takes longer than other methods.
  • Costlier than automated washes
  • More equipment is required than other methods.
  • It requires a lot of water
  • A challenge when you have a limited space
  • It’s difficult to complete in colder temperatures.

Method #2: Waterless Wash

A waterless washing requires one spray bottle, and some microfiber towels. Simply spray the surface using your waterless wash product and then wipe it clean with a microfiber cloth. Waterless washes are used by people for various reasons. For instance, they do not have space to wash their hands and they aren’t able to make use of water, are traveling, etc. In essence, it’s a choice of the last option. Why’s that? The reason is that waterless washes don’t work good at getting rid of heavy gunk. They’ll get rid of dust however, if you’ve just came back from a trip off-roading along a muddy trail, you’re unlikely to be able to get much success. Another disadvantage is the possibility of scratching. Although waterless wash products are specifically designed to smooth the surface but they’re not quite as close to the slickness that comes from the foamy handwash. There’s an excellent chance that you’ll get up and move a small particles across your surface which can cause scratches.

PROS:

  • It’s not as long as handwashes or rinseless wash
  • It is possible to do this with a limited space
  • Doesn’t drink water.
  • All you need is a waterless wash item and towels made of microfiber

CONS:

  • More chances to scratch
  • Can’t remove heavy contamination

Method #3: Rinseless Wash

Rinseless washing is different from a waterless wash. In a sense it’s like an amalgamation of handwash and waterless wash. When you use a rinseless wash it’s a matter of taking a small amount of the rinseless wash products and blend it in an ice bucket. There won’t be any suds. That’s the reason you don’t have to rinse. The only thing you have to do after washing an area is to wipe it down until dry. Rinseless washes are done using wash mitts, and microfiber towels. Many detailers favor this method “Garry Dean Method”, which involves soaking multiple towels made of microfiber in buckets that is filled with rinse-free wash products and water. Take one towel and wring it out and place it in a bucket to dry. After that, you spray the panel with a pre-wash solution and then grab a moist microfiber towel to begin Interior car cleaning in Augusta. You grab your drying towel, then dry the panel and the final step is to grab a new dry microfiber to complete your drying. Repeat the process panel-by-panel until your car is spotless. Rinseless washing is a method that is preferred by people with water restrictions or with limited space that are also concerned about the scratching that a waterless wash can cause. The method still causes more scratches than a handwash, however much less than a waterless. It won’t be able remove the heavy dirt as you would by handwashing.

PROS:

  • It is faster than handwashing
  • It requires less water than handwashes.
  • It requires less equipment than handwashing
  • Can be done with only a small amount of space
  • It is less likely to scratch than a wash that is water-free

CONS:

  • Much more susceptible to be scratched than handwash
  • Can’t remove heavy contamination
  • It requires greater equipment and tools than simple waterless wash

Method #4: Automatic Wash


Automatic car washes
Also known also as “tunnel” washes, generally require you to drive your car onto conveyor belts, which will lead you through a set of blowers and brushes. The bristles on these brushes are usually contaminated by the abrasive residue of earlier vehicles, which could damage the surface. They also employ harsh cleaning chemicals that could strip coatings/wax and dry out the paint which can cause cracking and even fade. Why would anyone choose to make use of any of them? It’s simple: they’re cheap and take a short time to complete and are the most well-known type of wash, due to their ease of use. Many people either don’t understand or aren’t concerned about how they’re damaging their paint. This isn’t necessarily a problem for professional detailers. All that scratching causes many people shell out for a painting correction!

PROS:

  • Inexpensive
  • Fast

CONS:

  • Causes intense scratching
  • Harsh chemicals can damage finish
  • It is not possible to eliminate heavy contamination.

Method #5: Brushless Wash

A “brushless car wash” is an automated wash that makes use of strips soft cloths instead of bristles to clean its machine. You may think it can solve the issue of bristles that are abrasive tearing your surface, but a dirty cloths can scratch the same way as bristles. Dirt left over from the hundreds of vehicles which came before yours can cause damage to the finish. Furthermore the washes use similar harsh substances as we have mentioned previously.

PROS:

  • Inexpensive
  • Fast
  • Abrasive less than a traditional brush wash that is automatic

CONS:

  • Causes substantial scratching
  • Harsh chemicals can damage finish
  • Might not be able to remove heavy contamination

Method #6: Touchless Wash

A “touchless car wash” cleanses your car without the brush or bristles. Instead the entire wash is carried out by using chemical cleaners, high pressure washers and pressurized water. This sounds like it can solve every issue with other automated washes, doesn’t it but it’s not exactly. One thing is that there are still harmful chemicals to contend with. Therefore, unless you wish to dry your paint or end up stripping the coating off, ensure that you know in advance what chemicals they’re employing. Keep in mind that brushless washes and touchless washes work
Not
The identical. Many people see “brushless” and assume that it means “touchless”. Avoid the mistake! Make sure you do your homework prior to purchase and make sure you’re buying the right type of wash.

PROS:

  • Much less expensive than hand washing
  • Fast
  • Reduces scratching

CONS:

  • Costlier than automatic and brushless washes.
  • The use of harsh chemicals can cause damage to the finishing
  • It is not possible to eliminate heavy contamination.

Other Methods

We’ve seen people wash their vehicles with every thing you can imagine, from paper towels to Windex. Of course, not because you
could
Doesn’t mean that it doesn’t mean
Should
. If it’s not yet an everyday practice it’s likely there’s an explanation for why. Whatever ingenious method you come up with you’re likely to harm your finishing. It’s not worth the effort.

Our Verdict

The most effective way to clean the finish of your vehicle is a handwash.

It’s the most gentle wash you can do without sacrificing precision. As with all things in life, sometimes , the most effective option isn’t always the best choice. What’s the best second choice (and third fourth, fifth, as well as sixth)? Here’s the ranking:

  1. Handwash
  2. Touchless wash (if using gentle soap)
  3. Rinseless wash
  4. Waterless wash
  5. Brushless wash
  6. Automatic wash

Agree? Disagree? Let us know in the comments below!

Leave a Reply

Your email address will not be published.